Dead Weight Testers | Master Test Gauges | Pressure Calibrators | Temperature Calibrators | Multifunction Calibrators | Electrical Test Equipment | Decade Boxes | Pressure Gauges | Instrument Valves | DBB & Monoflanges | Mixers

Budenberg Middle East Trading LLC,  Office no. 217  Bil Obaida Building,  Al Nahda Road,  Al Qusais 1,  Dubai,  United Arab Emirates

budenberg double block & bleed and monoflange valves

What we offer?

Budenberg wide range of Double block and bleed valves and monoflanges designed and manufactured in Manchester, UK.

All units are manufactured to suit the individual customer needs offering special configurations, connections and material.

The Model 93 is a range of high specification yet low cost Double Block & Bleed Valves for instrumentation applications that are available in any combination of Ball or Needle Valve assemblies.

The units are available in a full range of materials and options to meet the individual requirement. the compact slim line design enables them to be used in a wide range of applications particularly where space and weight must be kept to an absolute minimum.

Salient Features

Full floating Ball Valve Assemblies with cavity relief through the seats. Seat material is PTFE as standard and PEEK™ as an option.

Heavy duty Needle Valve Head Assemblies that incorporates a full range of features including:

  • Anti static, anti blow out stems
  • Self centring, non-rotating stem tips provide a true metal to metal valve seat whereby the material of the stem tip is one grade harder than the body thus resisting over tightening, preventing wear and guaranteeing a 100% bubble tight seat closure, first time, every time.
  • Seats can be hard faced with a choice of materials including stellite and tungsten.

Both Ball and Needle Valve Assemblies incorporate a “soft” parent metal sealing rings that are located directly below the head and connection adaptors to ensure that no threads are directly in the process stream.

Fully adjustable, dynamically responsive multi ring gland sandwich, in either PTFE or Graphoil, resist all operating pressures and processes. Budenberg offers 100% gland integrity for the lifetime of every valve.

Configuration, Bore size and Connections

Configurations:      

Double Block         Double Block & Bleed

Bore Sizes:               

10mm

Connections

Any standard end connection including Screwed connection up to 1″ NPT 

Butt or socket weld connections are available.

Standard Vent connection 1/2″ NPT Female screwed or as ordered.

Material of Construction

Standard material is 316SS to NACE MR 01-75 as standard. Other materials F51 Duplex, F55 Super Duplex, Monel, Hastelloy, Titanium, Inconel 625 Inconel 825 etc. are available.

Certification

All Valves are individually tested. A certificate of Conformity is supplied free of cost. Test Certificates including Gas Pressure and Hydro-static Testing to BS 6755/API598 is available.

Full range of Fire Safe, NDT Test Certification and Standard material certificate to EN10204 3.1b is supplied, if ordered separately.

Click to enlarge

Budenberg  98 Series Forged Double Block & Bleed Valves are available in two variants.

The Model 98S comprises of a full range of Single or Double Block & Bleed Valves that provide primary isolation when directly mounted onto process pipework or vessels. It provides an industry standard flanged inlet connection and a screwed vent and outlet connection to suit any instrumentation or take off requirements. 

The Model 98F is a full range of flange x flange, Single and Double Block & Bleed Valves manufactured from a one piece forging or forged barstock. It has industry standard hub or flanged end connections to suit any customer requirement and application.

Salient Features

Full floating Ball Valve Assemblies with cavity relief through the seats. Seat material is PTFE as standard and PEEK™ as an option.

Both Heavy duty Needle Valve  & OS&Y Valve Head Assemblies that incorporates a full range of features including:

  • Anti static, anti blow out stems
  • Self centring, non-rotating stem tips provide a true metal to metal valve seat whereby the material of the stem tip is one grade harder than the body thus resisting over tightening, preventing wear and guaranteeing a 100% bubble tight seat closure, first time, every time.
  • Seats can be hard faced with a choice of materials including stellite and tungsten.

All Ball, Needle and OS&Y Valve Assemblies incorporate a “soft” parent metal sealing rings that are located directly below the head and connection adaptors to ensure that no threads are directly in the process stream.

Fully adjustable, dynamically responsive multi ring gland sandwich, in either PTFE or Graphoil, resist all operating pressures and processes. Budenberg offers 100% gland integrity for the lifetime of every valve.

Configurations, Bore sizes and Connections

Configurations

Single Block               Single Block & Bleed

Double Block             Double Block & Bleed

Optionally: Quills and Check Valves can be integrally fitted into the units for injection or sampling applications.

Other configurations are available to suit any existing or new application.

Ball Valve Bore Sizes 

10 mm, 14 mm and 20 mm depending upon the type of valve selected.

Inlet Connections for 98S and Inlet & Outlet connection for 98F. 

Any flange type including:

  • ANSI B16.5 Flanges from 1/2″ to 4″ in rating from 150 to 2500 lbs in RF, FF, SRF and RTJ
  • API Flanges up to 2.1/16″, 3000, 5000 & 10,000 lbs
  • Hub end connections including Techlok, Norsok, Graylok etc
  • ECON 4500 range of Flanges

Outlet Connections for 98S

 1/2″ to 2″ screwed outlets to ANSI / ASME B1.20.1 

Socket weld and Butt Weld outlets are available.

Standard Vent connection 1/2″ NPT Female screwed or as ordered.

Material of Construction

Standard material is 316SS to NACE MR 01-75 as standard. Other materials F51 Duplex, F55 Super Duplex, Monel, Hastelloy, Titanium, Inconel 625 Inconel 825 etc. are available.

Certification

All Valves are individually tested. A certificate of Conformity is supplied free of cost. Test Certificates including Gas Pressure and Hydro-static Testing to BS 6755/API598 is available.

Full range of Fire Safe, NDT Test Certification and Standard material certificate to EN10204 3.1b is supplied, if ordered separately.

Click to enlarge
Click to enlarge

Budenberg  MV Series Modular Double Block & Bleed Valves are available in two variants.

The Model MVS & MVF is a three piece modular valve that can be readily configured into a full range of Single or Double Block & Bleed Valves that provide primary isolation when directly mounted onto process pipework or vessels. 

The MVS provides an industry standard flanged inlet connection and a screwed vent and outlet connection to suit any instrumentation or take off requirements. 

The MVF has industry standard flange or hub flanged inlet and outlet connections and a screwed or flanged vent connection to suit any customer application requirement.

Salient Features

Full floating Ball Valve Assemblies with cavity relief through the seats. Seat material is PTFE as standard and PEEK™ as an option.

Both Heavy duty Needle Valve  & OS&Y Valve Head Assemblies that incorporates a full range of features including:

  • Anti static, anti blow out stems
  • Self centring, non-rotating stem tips provide a true metal to metal valve seat whereby the material of the stem tip is one grade harder than the body thus resisting over tightening, preventing wear and guaranteeing a 100% bubble tight seat closure, first time, every time.
  • Seats can be hard faced with a choice of materials including stellite and tungsten.

All Ball, Needle and OS&Y Valve Assemblies incorporate a “soft” parent metal sealing rings that are located directly below the head and connection adaptors to ensure that no threads are directly in the process stream.

Fully adjustable, dynamically responsive multi ring gland sandwich, in either PTFE or Graphoil, resist all operating pressures and processes. Budenberg offers 100% gland integrity for the lifetime of every valve.

Configurations, Bore sizes and Connections

Configurations

Single Block               Single Block & Bleed

Double Block             Double Block & Bleed

Optionally: Quills and Check Valves can be integrally fitted into the units for injection or sampling applications.

Ball Valve Bore Sizes 

10 mm, 14 mm and 20 mm depending upon the type of valve selected.

Inlet Connections for MVS and Inlet & Outlet connection for MVF. 

Any flange type including:

  • ANSI B16.5 Flanges from 1/2″ to 4″ in rating from 150 to 2500 lbs in RF, FF, SRF and RTJ
  • API Flanges up to 2.1/16″, 3000, 5000 & 10,000 lbs
  • Hub end connections including Techlok, Norsok, Graylok etc
  • ECON 4500 range of Flanges

Outlet Connections for 98S

 1/2″ to 2″ screwed outlets to ANSI / ASME B1.20.1 

Socket weld and Butt Weld outlets are available.

Standard Vent connection 1/2″ NPT Female screwed or as ordered.

Material of Construction

Standard material is 316SS to NACE MR 01-75 as standard. Other materials F51 Duplex, F55 Super Duplex, Monel, Hastelloy, Titanium, Inconel 625 Inconel 825 etc. are available.

Certification

All Valves are individually tested. A certificate of Conformity is supplied free of cost. Test Certificates including Gas Pressure and Hydro-static Testing to BS 6755/API598 is available.

Full range of Fire Safe, NDT Test Certification and Standard material certificate to EN10204 3.1b is supplied, if ordered separately.

Click to enlarge
Click to enlarge

Budenberg  Single Block Monoflange Valves are available in two pressure ratings 6000 lb/in² and 10,000 lb/in².

The Model 6M & 10M is a range of  lightweight Monoflange isolation valves that incorporate an Outside Screw and Yoke bolted bonnet valve designed to meet the requirements of piping class installations in accordance with ASME / ANSI standards. The compact design incorporates a OS&Y Primary Isolation valve Head and outlet into a single one-piece body.

The Model 6MN & 10MN is a range of  lightweight Monoflange isolation valves that are ideally suited to a wide range of instrumentation applications via standard flanged pressure take-off points. The compact design incorporates a Isolation valve and outlet into a single one-piece body.

Salient Features

Heavy duty Needle Valve Head Assemblies incorporates a full range of features including:

  • Anti static, anti blow out stems
  • Self centring, non-rotating stem tips provide a true metal to metal valve seat whereby the material of the stem tip is one grade harder than the body thus resisting over tightening, preventing wear and guaranteeing a 100% bubble tight seat closure, first time, every time.

All Needle Valve Assemblies incorporate a “soft” parent metal sealing rings that are located directly below the head and connection adaptors to ensure that no threads are directly in the process stream.

Fully adjustable, dynamically responsive multi ring gland sandwich, in either RPTFE/PTFE or Graphoil, resists all operating pressures and processes.

Temperature rating from -54°C to +538°C dependent upon the stem packing material and pressure rating in use. Special Cryogenic Heads can be specified for temperature down to -200°C.

Configurations, Bore sizes and Connections

Configurations

Single Block / Isolation Valve

Bore Sizes 

6 mm standard, 8 mm can be provided depending upon the flange size and rating.

Inlet connections 

Any flange type including:

  • ANSI B16.5 Flanges from 1/2″ to 4″ in rating from 150 to 2500 lbs in RF, FF, SRF and RTJ
  • API Flanges up to 2.1/16″, 3000, 5000 & 10,000 lbs
  • Norsok L-100 Compact flange design

Outlet Connections

In Flange by Flange variants the outlet flange is identical to the inlet process flange as listed above. Other connections are:

  •  1/2″ NPT female standard
  • Kidney Flanges for direct connection onto transmitters
  • Quick release compression fittings

Working Pressure

Model 6M & 6MN:         6000 lb/in² maximum

Model 10M & 10MN:   10,000 lb/in² maximum

Material of Construction

Standard material is 316SS to NACE MR 01-75 as standard. Other materials F51 Duplex, F55 Super Duplex, Monel, Hastelloy, Titanium, Inconel 625 Inconel 825 etc. are available.

Certification

All Valves are individually tested. A certificate of Conformity is supplied free of cost. Test Certificates including Gas Pressure and Hydro-static Testing to BS 6755/API598 is available.

Full range of Fire Safe, NDT Test Certification and Standard material certificate to EN10204 3.1b is supplied, if ordered separately.

Click to enlarge
Click to enlarge
Click to enlarge

Budenberg  Single Block & Bleed Monoflange Valves are available in two pressure ratings 6000 lb/in² and 10,000 lb/in².

The Model 6MB & 10MB is a range of  lightweight Monoflange isolation valves that incorporate an Outside Screw and Yoke bolted bonnet primary isolation valve together with a heavy duty Needle Valve assembly for the vent valve. The compact one piece forging or forged barstock design incorporates the OS&Y Primary Isolation valve Head and outlet connection.

The Model 6MNB & 10MNB is a range of  lightweight Monoflange isolation that incorporates Heavy Duty Needle Valves for both the Primary isolation and the Vent Valve. The compact single piece forging or forged barstock design incorporates the Needle Valve Head and outlet connection.

Salient Features

Heavy duty Needle Valve Head Assemblies and OS&Y (6MB/10MB) incorporates a full range of features including:

  • Anti static, anti blow out stems
  • Self centring, non-rotating stem tips provide a true metal to metal valve seat whereby the material of the stem tip is one grade harder than the body thus resisting over tightening, preventing wear and guaranteeing a 100% bubble tight seat closure, first time, every time.

All Needle Valve Assemblies incorporate a “soft” parent metal sealing rings that are located directly below the head and connection adaptors to ensure that no threads are directly in the process stream.

Fully adjustable, dynamically responsive multi ring gland sandwich, in either RPTFE/PTFE or Graphoil, resists all operating pressures and processes.

Temperature rating from -54°C to +538°C dependent upon the stem packing material and pressure rating in use. Special Cryogenic Heads can be specified for temperature down to -200°C.

Configurations, Bore sizes and Connections

Configurations

Single Block / Isolation Valve and Vent / Bleed Valve

Bore Sizes 

6 mm standard, 8 mm can be provided depending upon the flange size and rating.

Inlet connections 

Any flange type including:

  • ANSI B16.5 Flanges from 1/2″ to 4″ in rating from 150 to 2500 lbs in RF, FF, SRF and RTJ
  • API Flanges up to 2.1/16″, 3000, 5000 & 10,000 lbs
  • Norsok L-100 Compact flange design

Outlet Connections

In Flange by Flange variants the outlet flange is identical to the inlet process flange as listed above. Other connections are:

  • 1/2″ NPT female standard
  • Kidney Flanges for direct connection onto transmitters
  • Quick release compression fittings

1/4″ NPT female vent as standard, other connections available.

Working Pressure

Model 6MB & 6MNB:         6000 lb/in² maximum

Model 10MB & 10MNB:   10,000 lb/in² maximum

Material of Construction

Standard material is 316SS to NACE MR 01-75 as standard. Other materials F51 Duplex, F55 Super Duplex, Monel, Hastelloy, Titanium, Inconel 625 Inconel 825 etc. are available.

Certification

All Valves are individually tested. A certificate of Conformity is supplied free of cost. Test Certificates including Gas Pressure and Hydro-static Testing to BS 6755/API598 is available.

Full range of Fire Safe, NDT Test Certification and Standard material certificate to EN10204 3.1b is supplied, if ordered separately.

Click to enlarge
Click to enlarge

Budenberg  Double Block & Bleed Monoflange Valves are available in two pressure ratings 6000 lb/in² and 10,000 lb/in².

The Model 6MBB & 10MBB is a range of  lightweight Double Block & Bleed Monoflange isolation valves that incorporate an Outside Screw and Yoke bolted bonnet primary isolation valve together with a heavy duty Needle Heads for the Secondary isolation and vent Valves. The compact one piece forging or forged barstock design incorporates the OS&Y Primary Isolation Valve and Heavy duty Needle Valves for Secondary isolate and vent.

The Model 6MNBB & 10MNBB is a range of  lightweight Double Block & Bleed Monoflange isolation valves that are ideally suited to a wide range of instrumentation applications via standard flanged pressure take off points. The compact single piece forging or forged barstock design incorporates the Needle Valve Head and outlet connection.

Salient Features

Heavy duty Needle Valve Head Assemblies and OS&Y (6MBB/10MBB) incorporates a full range of features including:

  • Anti static, anti blow out stems
  • Self centring, non-rotating stem tips provide a true metal to metal valve seat whereby the material of the stem tip is one grade harder than the body thus resisting over tightening, preventing wear and guaranteeing a 100% bubble tight seat closure, first time, every time.

All Needle Valve Assemblies incorporate a “soft” parent metal sealing rings that are located directly below the head and connection adaptors to ensure that no threads are directly in the process stream.

Fully adjustable, dynamically responsive multi ring gland sandwich, in either PTFE or Graphoil, resists all operating pressures and processes.

Temperature rating from -54°C to +538°C dependent upon the stem packing material and pressure rating in use. 

Configurations, Bore sizes and Connections

Configurations

Double Block / Isolation Valve and Vent / Drain Valve

Bore Sizes 

6 mm standard, 8 mm can be provided depending upon the flange size and rating.

Inlet connections 

Any flange type including:

  • ANSI B16.5 Flanges from 1/2″ to 4″ in rating from 150 to 2500 lbs in RF, FF, SRF and RTJ
  • API Flanges up to 2.1/16″, 3000, 5000 & 10,000 lbs
  • Norsok L-100 Compact flange design

Outlet Connections

In Flange by Flange variants the outlet flange is identical to the inlet process flange as listed above. Other connections are:

  • 1/2″ NPT female standard
  • Kidney Flanges for direct connection onto transmitters
  • Quick release compression fittings

1/4″ NPT female vent as standard, other connections available.

Working Pressure

Model 6MB & 6MNB:         6000 lb/in² maximum

Model 10MB & 10MNB:   10,000 lb/in² maximum

Material of Construction

Standard material is 316SS to NACE MR 01-75 as standard. Other materials F51 Duplex, F55 Super Duplex, Monel, Hastelloy, Titanium, Inconel 625 Inconel 825 etc. are available.

Certification

All Valves are individually tested. A certificate of Conformity is supplied free of cost. Test Certificates including Gas Pressure and Hydro-static Testing to BS 6755/API598 is available.

Full range of Fire Safe, NDT Test Certification and Standard material certificate to EN10204 3.1b is supplied, if ordered separately.

Click to enlarge
Click to enlarge