Budenberg Middle East LLC

Dead Weight Testers I Master Test Gauges I Pressure Calibrators I Temperature Calibrators I Multifunction Calibrators I Electrical Test Equipment I Pressure & Temperature Gauges I Valves I Temperature Sensors I Cables I Mixers

ge druck pressure and process calibrators

What we offer?

Budenberg Middle East offers GE Druck Pressure and Process Calibrators widely popular and used by technicians for calibration checks in laboratories and fields.

Both General purpose and intrinsically safe calibrators and test gauges are available.

DPI 610 / 615 - IS Intrinsically Safe Portable Pressure Calibrators

The technically advanced Druck DPI 610-IS and DPI 615-IS portable calibrators are the culmination of many years of field experience with the company’s DPI 600 series.

These self-contained, battery powered packages contain a pressure generator, fine pressure control and output measurement capabilities, as well as facilities for 4 to 20 mA loop testing and data storage. The rugged weatherproof design is styled such that the pressure pump can be operated and test leads connected without compromising the visibility of the large dual parameter display. The mA step and ramp outputs and a built-in continuity tester extend the capabilities to include the commissioning and maintenance of control loops.

DPI 610-IS unidirectional for uploading results to a PC
DPI 615-IS bidirectional for downloading procedures and uploading results

Features

  • Pneumatic Ranges from 2.5 mbar up to 20 bar
  • Hydraulic Ranges 0 – 135 bar, 0 – 160 bar and 0 – 400 bar 
  • Accuracy from 0.025% full scale (FS)
  • Integral combined pressure/vacuum pump
  • Dual readout: input and output
  • 4 to 20 mA loop test: auto step and ramp
  • Intrinsically safe (IS)
  • RS232 interface and fully documenting version
Click to enlarge

Specifications

DPI 610/615PC-IS Pneumatic  Calibrator

Hand-Pump  

Volume Adjuster  

Release Valve 

Pressure Port   

Media

 -850 mbar to 20 bar capability

Fine pressure adjustment

Vent and controlled release

G 1/8 female

Most common gases

DPI 610/615PC-IS Low Pressure Pneumatic  Calibrator

Volume Adjuster  

Release Valve 

Pressure Port   

Media

Dual piston for coarse/fine pressure setting

Vent and controlled release

G 1/8 female

No corrosive gases

DPI 610/615HC-IS Hydraulic  Calibrator

Priming Pump 

Shut-off Valve 

Screw Press   

Pressure Port   

Media

M5 female feed port

Open for system priming

0 – 400 bar capability

G 1/8 female

Demineralized water and most hydraulic oils

Common Specifications

Display Panel 

Readout

RS232 Interface   

Environmental 

Sealing

Conformity

Physical

Accessories 

60 mm x 60 mm graphic LCD

± 99999 capability, two readings per second

For use in Safe Area only

Operating Temperature -10°C to 50°C  ;  Calibrated: -10°C to 40°C, Humidity 0 to 90%, non-condensing

IP54

Intrinsically safe version: Supplied certified for use in hazardous areas II 1 GEEx ia IIC T4 (-10°C to 50°C) To EN50014:1997 + amds 1 and 2  EN50020:1994  ;  EN50284:1999

Weight: 3 kg, size: 300mm x 170mm x 140mm

The DPI 610/615 is supplied with carrying case, test leads, user guide and calibration certificate with data. The DPI 610HC-IS also has a 250ml  polypropylene fluid container and priming tube.

DPI 612 Flex Series Pressure Calibrators

These fully self-contained pressure test and calibration systems have interchangeable pressure modules for flexible ranging, generate pneumatic or hydraulic pressures, measure process signals and supply loop power. They provide all the convenience of the Druck DPI 610/615 series with significantly improved generation capabilities, higher accuracy and simplified touch screen operation.

Features

  • The complete pressure calibration tool: pump, measure, analyse
  • Best in class pressure accuracy
  • Fast and dependable from vacuum to 1000 bar/15000 psi
  • Easy to use touch screen
  • No in-the-field leaks with quick-to-fit pressure adaptors & hoses

Pressure generation & flexible pressure ranging modules

Three models to generate from 95% vacuum to 1000 bar/ 15000 psi

  • 20 bar/300 psi in 30 seconds
  • 100 bar/1500 psi without gas bottles and regulators
  • 1000 bar/15000 psi hydraulic pressure
  • 31 interchangeable pressure modules from 25 mbar/10 inH20 to 1000 bar/15000 psi
  • Accuracy from 0.005% FS
  • “Hot swap” without tools, seals or cables
Click to enlarge

There are three models in the Druck DPI 612 Flex series to generate pressures from 95% vacuum to 1000 bar/ 15000 psi. Their dependable, high performance pressure systems provide quick and easy generation with great accuracy.

Model DPI 612 pFlex: 95% vacuum to 20 bar / 300 psi (8 ranges)

Each DPI 612 pFlex includes battery charger ( IO620-PSU), carrying strap (IO612-STRAP), test leads (IO61X-LEADS), user guide and calibration certificate. Ranges shown as g/abs can be used in sealed gauge or absolute mode via a software feature. Please refer to datasheet for the PM 620 pressure module specification table for pressure accuracies

Model DPI 612 pFlexPro: 95% vacuum to 100 bar / 1500 psi (5 ranges)

Each DPI 612 pFlexPro includes battery charger ( IO620-PSU), carrying strap (IO612-STRAP), test leads (IO61X-LEADS), user guide and calibration certificate. Ranges shown as g/abs can be used in sealed gauge or absolute mode via a software feature. Please refer to the datasheet for PM 620 pressure module specification table for pressure accuracies.

Model DPI 612 hFlexPro: 0 to 1000 bar / 15000 psi (4 ranges)

Each DPI 612 hFlexPro includes battery charger ( IO620-PSU), carrying strap (IO612-STRAP), test leads (IO61X-LEADS), fluid bottle, user guide and calibration certificate. Ranges shown as g/abs can be used in sealed gauge or absolute mode via a software feature Please refer to the PM 620 pressure module specification table for pressure accuracies.

The pressure modules are fully interchangeable between the DPI 612 Flex series and the DPI 620 Genii multi-function calibrator / communicator series.

DPI 620 Genii - Advanced Modular Calibrator and HART®/ Foundation Fieldbus Communicator

Combines an advanced multi-function calibrator and HART/Foundation Fieldbus communicator with world-class pressure measurement and generation. ATEX and IECEx approved intrinsically safe versions are available for use in hazardous areas.

Features

  • Electrical Measurement & Source, Simulate and Measure RTDs & Thermocouples
  • Smart phone technology touch display
  • Can display up to 6 active readings
  • Calculates errors between inputs/outputs
  • Pressure system generates 100 bar/1,500 psi pneumatic and 1000 bar/15,000 psi hydraulic
  • Interchangeable pressure modules from 25 mbar/1 inH2O to 1,000 bar/15,000 psi
  • Complete HART communicator included
  • Optional Foundation Fieldbus communicator
  • ATEX and IECEx approved for hazardous area use
  • Long-life battery pack
  • Weather-proof to IP 65
Click to enlarge

The Druck DPI 620 Genii Series – Advanced Modular Calibrator and HART / Fieldbus Communicator comprises four system components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments. These system components are:

DPI620G – Multi-function calibrator, HART / Fieldbus Communicator

           PM620       –  Interchangeable pressure modules

           MC620G    –  Pressure module carrier

           PV62XG     –  Pressure generating stations

The DPI 620/G are supplied with a rechargeable lithium polymer battery P/N IO620-BATTERY, universal mains adaptor/charger P/N IO620-PSU, IO620-AC 300 VAC true rms measurement probe, test leads, calibration certificate, and quick reference guide.

Combining any of the pressure stations with a PM620 pressure module and the DPI620 series calibrator creates a uniquely capable, self-contained pressure calibrator

PM 620 Pressure Modules

Features

  • Fully interchangeable with no need for set-up or calibration
  • A Simple screw fit – hand tight no tools required
  • 31 Ranges from 25 mbar to 1000 bar (10 inH2O to 15000 psi)
  • Accuracy from 0.005% FS
  • Safe and Hazardous area Versions available

Pressure ranges are available from 25 mbar to 1000 bar (10 inH2O to 15000 psi) with a total measurement uncertainty, including operation over 0 to 50o C (32 to 122°F) for one year. Supplied with calibration certificate.

MC 620G Module Carrier

Features

  • 2 independent pressure channels
  • Simple to re-range
  • Pressure protection
  • No tools or setup – just a simple screw fit
  • Pressure protection

The MC620/G module carrier attaches to the head of the DPI620/G to provide two independent pressure measurement channels. These can be fitted with any PM 620 pressure module from 25 mbar to 1000 bar (10 inH2O to 15000 psi).

Supplied with G 1/8 female and 1/8 NPT female adaptors (2 of each).

The PV 621/G, 622/G and 623/G Pressure Generating Stations

Features

  • A uniquely capable, re-rangeable and self-contained pressure test system
  • Advanced pressure generation
  • 95% vacuum to 20 bar (300 psi) pneumatic
  • 95% vacuum to 100 bar (1500 psi) pneumatic
  • 0 to 1000 bar (15000 psi) hydraulic
  • Each pressure station is designed for stand-alone operation as a pressure generator
  • Bench top use as comparators
  • Safe and Hazardous area Versions available

There are three pressure generation stations:

  1. PV 621G, a pneumatic pressure generator for pressures 95% vacuum to 20 bar (300 psi)
  2. PV 622G2, a pneumatic pressure generator for pressures 95% vacuum to 100 bar (1500 psi.
  3. PV 623G, a hydraulic pressure generator for pressures up to 1000 bar (15000 psi)

The PV 621/G, 622/G and 623/G are supplied with G1/8 female and 1/8 NPT female adaptors, carry strap, and quick reference guide. In addition, the PV 623/G includes a plastic bottle for hydraulic fluid.

Combining any of the pressure stations with a PM620 pressure module and the DPI620 series calibrator creates a uniquely capable, self-contained pressure calibrator

Model DPI620G
Model DPI620G
Model DPI620G

Genii advanced modular calibrator and HART communicator

Genii advanced modular calibrator and HART/Fieldbus communicator

Genii advanced modular calibrator retains all the features of Model DPI620G,but does not include the HART or Fieldbus communicator

There is wide range of accessories available when ordered separately. Refer to datasheet.

DPI 620 Genii - Intrinsically safe systems for hazardous area use

Features

  • Electrical Measurement & Source, Simulate and Measure RTDs & Thermocouples
  • Smart phone technology touch display
  • Can display up to 6 active readings
  • Calculates errors between inputs/outputs
  • Pressure system generates 100 bar/1,500 psi pneumatic and 1000 bar/15,000 psi hydraulic
  • Interchangeable pressure modules from 25 mbar/1 inH2O to 1,000 bar/15,000 psi
  • Complete HART communicator included
  • Optional Foundation Fieldbus communicator
  • ATEX and IECEx approved for hazardous area use
  • Long-life battery pack
  • Weather-proof to IP 65
Click to enlarge

The Druck intrinsically safe DPI 620 Genii Series – Advanced Modular Calibrator and HART / Fieldbus Communicator comprises four system components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments. These system components are:

PM620-IS – Intrinsically Safe Interchangeable pressure modules

MC620-IS – Intrinsically Safe pressure module carrier

PV62X-IS – Intrinsically Safe pressure generating stations

Combining any of the pressure stations with a PM620-IS pressure module and the DPI620-IS series calibrator creates a uniquely capable, self-contained pressure calibrator

Model PM620-IS “pressure range” and “type”

Intrinsically safe pressure module supplied with calibration certificate. Please state model number, pressure range and type gauge or absolute e.g., PM620-IS 20 bar (300 psi) gauge (see datasheet for pressure ranges)

Model MC620-IS

Pressure module carrier for DPI620G-IS series. Supplied with G 1/8 female and 1/8 NPT female adaptors (2 of each)

The PV 621-IS, 622-IS and 623-IS Pressure Generating Stations

There are three pressure generating stations:

  1. Model PV621-IS  Intrinsically safe pneumatic pressure generating station vacuum to 20 bar (300 psi)
  2. Model PV622-IS  Intrinsically safe pneumatic pressure generating station vacuum to 100 bar (1,500 psi)
  3. Model PV623-IS  Intrinsically safe hydraulic pressure generating station 0 to 1,000 bar (15,000 psi)

The PV621-IS, 622-IS and 623-IS are supplied with G1/8 female and 1/8 NPT female adaptors, carry strap, and quick reference guide. In addition, the PV623-IS includes a plastic refill bottle for hydraulic fluid

Combining any of the above pressure stations with a PM620-IS pressure module and the DPI620-IS series calibrator creates a uniquely capable, self-contained pressure calibrator

Model DPI620G-IS
Model DPI620G-IS-FF
Model DPI620G-IS-PB
Model DPI620G-IS-FFPB
Model DPI620G-IS-L

Genii intrinsically safe advanced modular calibrator and HART communicator

Genii intrinsically safe advanced modular calibrator and HART/Fieldbus communicator

Genii Intrinsically safe advanced modular calibrator and HART/Profi bus communicator

Genii intrinsically safe advanced modular calibrator and HART/Foundation Fieldbus and Profi bus communicator

Genii intrinsically safe advanced modular calibrator without communicator. Retains all the features of Model DPI620G-IS, but does not include the HART or Fieldbus communicator

The DPI 620G-IS Series are supplied with a rechargeable lithium ion battery P/N IO620G-IS-BATTERY, universal mains adaptor P/N IO620-PSU and charger P/N IO620G-IS-CHARGER, test leads, calibration certificate, and quick reference guide

There is wide range of accessories available when ordered separately. Refer to datasheet.

DPI 705 Series Druck Handheld Pressure Indicators

Features & Specifications

The Druck DPI 705 Series of handheld pressure indicators combine tough and rugged design with accurate and reliable pressure measurement.

Compact, robust and lightweight, the  DPI 705 Series is designed for single handed operation and provides many essential features required for routine maintenance and system troubleshooting.

  • 14 Ranges 0 to 70 mbar (1 psi) through to 700 bar (10,000 psi)
  • 0.1% full scale (FS) accuracy
  • Rugged, lightweight handheld design
  • Leak test, tare, max/min and filter
  • Intrinsically safe version
  • Optional pneumatic and hydraulic hand pumps
Click to enlarge

UPS II Druck Smart Loop Calibrator for Milliamps

Features & Specifications

  • Sources and reads milliamps
  • 24 Volt internal loop-power
  • Powers and reads two-wire transmitters
  • Reads and simulates dp-transmitters
  • Fixed calibration currents
  • Auto-stepping for handsfree calibration
  • Auto-ramp cycling for endurance tests
  • Fixed currents for valve stroking
  • Includes carrying case, set of batteries, instruction guide and spare fuse
Click to enlarge

UPS-III Druck Loop Calibrator

Features & Specifications

The UPS-III is a rugged and extremely compact loop calibrator. Measuring 77 mm x 129 mm (3 in. x 5 in.) and weighing just 275 g (9.7 oz), it fits comfortably in a shirt pocket. It is an essential tool for loop testing, instrument maintenance and valve set-up, with an easy to read display and simple to use time saving features.

  • Measure or source 0 to 24 mA
  • Accuracy 0.01% of reading
  • Dual mA or % readout, linear or flow
  • Step, span check, valve check, ramp
  • 60 VDC measurement and continuity
  • HART® compatible
  • Adjustable display contrast
  • Adjustable resolution
  • Uses industry standard AA batteries
  • Battery voltage and battery low indicator
  • Information screen reports serial number, software version and calibration date
  • Primary reading in mA or %
  • Auto power off (enable or disable)
  • Pin protected closed case calibration
  • Optional protective over-boot with bench stand, hanging loop and quick connect belt clip
  • Optional AC line adaptor
  • Supplied as standard with a certificate of calibration, user guide, test leads, and a set of alkaline batteries
Click to enlarge

DPI 800/802 Druck Pressure Indicator/Loop Calibrator

Features & Specifications

The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.

  • Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
  • Single or dual range configuration
  • IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
  • mA measure, switch test and 24V loop power
  • Large backlit display, menu driven interface • HART® loop resistor
  • Robust and weatherproof
  • Compact, simple to use, easy to carry
  • Convenient, one-handed operation
  • Secure grip, impact resistant, elastomer protected
  • Plug/play connector for IDOS Universal Measurement Modules
Click to enlarge

DPI 800 Pressure Indicator

Pressure Ranges 10 in H2O to 10,000 psi (25 mbar to 700 bar) including vacuum options

The unit is supplied with batteries, calibration certificate and user guide.

DPI 802 Pressure Loop Calibrator

Provides simultaneous pressure and mA measurement for transmitter and loop maintenance

The unit is supplied with batteries, calibration certificate and user guide. The DPI 802 and DPI 802P include a set of electrical test leads.

DPI 811/812 Druck RTD Calibrator/ Loop Calibrator

Features & Specifications

The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.

  • Measure and simulate RTDs
  • Automatic detection of two-, three- and four-wire RTDs highlights faulty probes
  • mA measure, switch test and 24V loop power
  • Large backlit display, menu driven interface
  • HART® loop resistor
  • Robust and weatherproof
  • Compact, simple to use, easy to carry
  • Convenient, one-handed operation
  • Secure grip, impact resistant, elastomer protection
  • Plug and play connector for Intelligent Digital Output Sensor (IDOS™) Universal Measurement Modules
Click to enlarge

DPI 811 RTD Calibrator

  • Measures or simulates RTD sensor and is the ideal tool for checking probes, indicators, recorders and controllers
  • Automatic Detection of Two-, Three- and Four-Wires
  • Pulsed RTD Transmitter Compatibility
  • Step, ramp, maximum/minimum/average hold and facilitate troubleshooting and system checks

DPI 812 RTD Loop Calibrator

  • Provides simultaneous RTD output and mA measurement for transmitter/loop maintenance
  • 24V Loop Power Supply
  • Energizes transmitters and control loops
  • Automatic Switch Test
  • Captures open/closed trip values providing a fast and highly accurate “safety system” check
  • HART 250 Ω Resistor can be switched into the loop when required by a HART digital communicator.

DPI 821/822 Druck Thermocouple Loop Calibrator

Specifications & Features

The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.

  • Measure and source thermocouples
  • Advanced Cold Junction compensation virtually eliminates errors due to ambient temperature changes
  • mA measure, switch test and 24V loop power
  • Large backlit display, menu driven interface
  • HART® loop resistor
  • Robust and weatherproof
  • Compact, simple to use, easy to carry
  • Convenient, one-handed operation
  • Secure grip, impact resistant, elastomer protected
  • Plug/play connector for Intelligent Digital Output Sensor (IDOS™) Universal Measurement Modules
Click to enlarge

DPI 821 Thermocouple Calibrator

  • Measures or simulates thermocouple sensors and is the ideal tool for checking probes, indicators and controllers
  • Unique Cold Junction Compensation
  • Virtually eliminates ambient temperature errors. (Patent pending)
  • Step, ramp, scaling, maximum/minimum/average, and hold facilitate system checks and troubleshooting

DPI 822 Thermocouple Loop Calibrator

  • Provides simultaneous T/C output and mA measurement for transmitter and loop maintenance
  • 24 V Loop Power Supply
  • Energizes transmitters and control loops
  • Automatic Switch Test
  • Captures open/closed trip values providing a fast and highly accurate “safety system” check
  • HART 250 Ω resistor can be switched into the loop when required by a HART digital communicator
  • 0.4°F (0.2°C) maximum Cold Junction Error for 86°F (30°C) change in ambient temperature

DPI 104-IS Druck Digital Test Gauge

Features

The DPI 104 is an intrinsically safe version of the  microprocessor-controlled DPI 104 digital pressure gauge. The DPI 104-IS matches advanced silicon sensor technology with several convenient design features, resulting in an accurate, versatile yet affordable digital test gauge. 

Supplied as a standalone process indicator or in a kit with the hand pumps, the DPI 104-IS provides a reliable and economic solution for a wide range of pressure sensing applications.

  • Intrinsically safe
  • ATEX and IECEx approval
  • 0.05% full scale (FS) accuracy
  • Pressure ranges to 20,000 psi (1400 bar)
  • Eleven selectable pressure units
  • Large, easy-to-read display with five-digit resolution
  • Free of charge monitoring and control software
  • % pressure indication and additional bar graph for quick visual reference
  • Temperature compensated accuracy from -10°C to 50°C (14°F to 122°F)
  • Pressure switch test
  • Minimum/maximum, tare and alarm functions
  • Stainless steel or Inconel pressure cavity for aggressive media

Specifications

Accuracy

0.05% FS including non-linearity, hysteresis, repeatability and temperature effects from 14°F to 122°F (-10°C to 50°C)

Resolution

Maximum five digits

Pressure Ranges

0-0.7, 0-2, 0-7, 0-20, 0-70, 0-200, 0-350, 0-700, 0-1000, 0-1400 bar

Selectable Pressure Units

kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg

Battery

The DPI 104-IS is supplied with a 9V alkaline battery, type MN1604. Battery life is approximately four months when used daily for one hour per day.

Pressure Port

1/4 NPT or BSP male for units to 10,000 psi (700bar) and 9/16 x 18 UNF male cone connection 15,000 psi (1000 bar) and 20,000 psi (1400 bar) units

Enclosure

Case material: ABS/PC plastic sealed to Type 4/IP65

Wetted parts: All stainless steel (316) or Inconel welded pressure cavity for compatibility with aggressive media.

Intrinsically Safe Certification

ATEX: ExII 1G, EEx ia IIC T4  and  IECEx: Zone 0, Ex ia IIC T4

RS232 Interface

Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA4090-2-V0) (saef area only).

SiCalPro Software

This software package allows the user to control the DPI 104-IS remotely through a virtual instrument panel on the computer screen.