Budenberg Middle East LLC

Dead Weight Testers I Master Test Gauges I Pressure Calibrators I Temperature Calibrators I Multifunction Calibrators I Electrical Test Equipment I Pressure & Temperature Gauges I Valves I Temperature Sensors I Cables I Mixers

eurotron hand pumps, test kits and calibrators

What we offer?

Budenberg Middle East offers Eurotron (EiUK) Hand pumps for vacuum and Pressure calibrations of pressure devices both on-site and in the laboratory. 

These are available as stand alone pumps or kits or complete calibrators which includes Digital Test Gauge.

The PGS series pumps are a remarkable new range of hand pumps for generating vacuum, gas and hydraulic pressure from a few mbar up to 1000 bar. These are generally used in conjunction with a digital test gauge or analogue pressure indicator ( often referred as ” the master gauge” for calibration and testing of pressure gauges, pressure transmitters, pressure switches, safety valves and all kind of pressure devices both on-site on in the laboratory.

HAND PUMPS

PGS Series Vacuum and Low Pressure Test Pumps

The PGS1V and PGS7 Calibration hand pump have been designed for generating vacuum or low pressure with an high degree of sensitivity and they are particular suitable for applying precise and stable low pressure values to differential pressure transmitters or very low pressure gauges.

The long course volume control allow to increase and decrease pressure with-out losing any volume. It also allows to adjust pressure with-in 0.05 mbar resolution.

The PGS1V and PGS7 are supplied with the “T” piece dual hose connector which allows dual pressure output for both the UUT (Unit under Test) and the reference instrument. The size of the “T” piece is suitable for the 4×6 mm pressure hose which is the industry standard size.

PGS-1V: Vacuum Hand Pump

Salient features

  • Range from 0 to -900 mbar (28 inHg)
  • Sensitivity 0.05 mbar
  • Fine adjustment 1 mbar
  • Integrated long volume adjuster
  • Bleed and Relief valve
  • Dual Port Pressure output
PGS1V & PGS7, Click to enlarge

PGS-7: Low Pressure Pneumatic Hand Pump

Salient features

  • Range from 0 to 7 bar (100 lb/in²)
  • Sensitivity 0.05 mbar
  • Fine adjustment 1 mbar
  • Integrated long volume adjuster
  • Bleed and Relief valve
  • Dual Port Pressure output

PGS Series Pneumatic Pressure Hand Pump

EiUK PGS series Pneumatic Pumps can generate both Vacuum and pressure up to 60 bar. It takes only seconds to switch between pressure and vacuum. Each pump has built-in vent valve and volume control for reaching the desire pressure. The Pump has a dual output, one for the unit under test and one for the P100 Digital Test Gauge.

PGS-40: Pneumatic Hand Pump

Salient features

  • Dual source for pressure and vacuum
  • Pressure to 40 bar (600 lb/in²)
  • Vacuum to 28 In Hg ( – 960 mbar)
  • Medium Air
  • Built-in fine adjustment
  • Valve selector for pressure/vacuum operation
  • Controlled vent using precise needle valve
  • Adjustable Stroke as standard
PGS40/PGS 60, Click to enlarge

PGS-60: High Pressure Pneumatic Pump

Salient features

  • Dual source for pressure and vacuum
  • Pressure to 60 bar (870 lb/in²)
  • Vacuum to 28 In Hg ( – 960 mbar)
  • Medium Air
  • Built-in fine adjustment
  • Valve selector for pressure/vacuum operation
  • Controlled vent using precise needle valve
  • Adjustable Stroke as standard

Specifications and Models

Model   ⇒

Data   ⇓

PGS-1V-OEM

PGS-7-OEM

PGS-40-OEM

PGS-60-OEM

PGS-40-OEM-G14

PGS-60-OEM-G14

PGS-60-OEM-N14

PGS-40-OEM-N14

Pressure Range

Vacuum Range

Ref. Port Connection

0 to 7 bar (PGS-7)

0 to -850 mbar (PGS-1V)

1/8"NPT Female

0 to 40 bar (PGS-40) / 0 to 60 bar (PGS-60)

0 to -960 mbar

3/8" BSP (F)

Ref. Port Standard Adaptor

1/4" BSP Female

1/2" BSP Female

1/4" BSP Female

1/4" NPT Female

Media

Fine Adjustment

Material

Standard Supply

Air

1 mbar

Aluminium, brass, ABS, NBR

Pump, test hose, instruction manual, reference port fitted adapter, carton box

Test Point Connection

1/4 ” BSP female

1/4" NPT Female

Test Hose

Weight

2 x 1 meter

250 grams

0.5 meter flexible test hose with 1/4" BSP (F) end

510 grams

Please note: The OEM Pumps are supplied as standalone units without Adaptors, seals and Transit Case.

PGS Series Hydraulic Pressure Hand Pump

EiUK PGS Series Hydraulic Pressure Pumps are available in two variants, 700 bar & 1000 bar; especially designed and manufactured to work in expose conditions. Each pump has built-in OIL/WATER reservoir, pressure hose, vent valve and volume control. The Pump has a dual output, one for the unit under test and one for test Gauge.

PGS-700: Hydraulic Hand Pump

Salient features

  • Range to 700 bar (10000 lb/in²)
  • Large transparent 200 CC reservoir
  • Controlled pressure release and fine adjustment
  • High Pressure Flexible Test Hose rated to 1500 bar
  • Suitable for working with OIL or WATER
  • Unique Priming/high pressure selector mode for quick operation
  • Supplied as pump only or in Kit version
  • Wide choice of digital and analogue test gauges
PGS700/1000. Click to enlarge

PGS-1000: High Pressure Hydraulic Pump

Salient features

  • Pressure Range: 0 to 1000 bar (14500 lb/in²)
  • Suitable for working with OIL or WATER
  • Priming function and high pressure generation mode
  • Extra fine volume adjuster
  • Controlled pressure relief valve
  • High pressure hose (WP: 1500 bar) as standard designed for low expansion at high pressure
  • High quality stainless steel test point adapters
  • Supplied as pump only or convenient pressure test kit
  • Wide choice of digital test gauges

Specifications and Models

Model   ⇒

Data   ⇓

PGS-700-OEM

PGS-1000-OEM

PGS-700

PGS-1000

PGS-700-OEM-G14

PGS-100-OEM-G14

PGS-700-G14

PGS-1000-G14

PGS-700-OEM-N14

PGS-1000-OEM-N14

PGS-700-N14

PGS-1000-N14

Pressure Range

Media

Fine Adjustment

Material

Ref. Port Connection

0 to 700 bar (PGS-700) and 0 to 1000 bar (PGS-1000)

Oil / Water

10 to 100 mbar

Aluminium, brass, ABS, NBR

3/8" BSP (F)

Ref. Port Standard Adaptor

1/2" BSP Female

1/4" BSP Female

1/4" NPT Female

Test Point Connection

1/4" BSP Female

1/4" NPT Female

Test Hose supplied

No

Yes

No

Yes

No

Yes

Test Hose

Weight

Standard Supply

1 meter flexible test hose with 1/4" BSP (F) end, rated @1500 bar (Optional)

approximately 1.6 kg

Pump, instruction manual, reference port fitted adapter, carton box and hose as indicated above

hand pump kits and calibrators

PGS Series Vacuum & Pneumatic Pressure Test Kits

The OEM Pumps when supplied with Hose, adaptors, seals, and transit case are called Test Kits

PGS-1V-P-XXX Vacuum Test Kits

The Kit comprises of: PGS-1V-OEM Pump, Set of BSP adaptors (1/4" BSP(M) to 1/8", 3/8"(F) & 1/2" BSP(M)) or Set of NPT adaptors (1/4" BSP(M) to 1/8", 3/8"& 1/4" NPT(F)) as ordered, Set of seals, 'T' pressure connection, 2 x 1 meter hose with 1/4" BSP(F) end and Robust foamed ABS transit case

PGS-7-P-XXX LP Test Kits

The Kit comprises of: PGS-7-OEM Pump, Set of BSP adaptors (1/4" BSP(M) to 1/8", 3/8"(F) & 1/2" BSP(M)) or Set of NPT adaptors (1/4" BSP(M) to 1/8", 3/8"& 1/4" NPT(F)) as ordered, Set of seals, 'T' pressure connection, 2 x 1 meter hose with 1/4" BSP(F) end and Robust foamed ABS transit case

PGS-40-P-XXX Pneumatic Test Kits

The Kit comprises of: PGS-40-OEM Pump, Set of BSP adaptors (1/4" BSP(M) to 1/8", 3/8"(F) & 1/2" BSP(M)) or Set of NPT adaptors (1/4" BSP(M) to 1/8", 3/8"& 1/4" NPT(F)) as ordered, Set of seals, 0.5 meter hose with 1/4" BSP(F) adaptor and Robust foamed ABS transit case

PGS-60-P-XXX Pneumatic Test Kits

The Kit comprises of: PGS-60-OEM Pump, Set of BSP adaptors (1/4" BSP(M) to 1/8", 3/8"(F) & 1/2" BSP(M)) or Set of NPT adaptors (1/4" BSP(M) to 1/8", 3/8"& 1/4" NPT(F)) as ordered, Set of seals, 0.5 meter hose with 1/4" BSP(F) adaptor and Robust foamed ABS transit case

(XXX – BSP or NPT)

PGS Series Hydraulic Pressure Test Kits

The OEM Pumps when supplied with Hose, adaptors, seals, and transit case are called Test Kits

PGS-700-H-XXX Hydraulic Test Kits

The Kit comprises of: PGS-700-OEM Pump, Set of BSP adaptors (1/4" BSP(M) to 1/8", 3/8"(F) & 1/2" BSP(M)) or Set of NPT adaptors (1/4" BSP(M) to 1/8", 3/8"& 1/4" NPT(F)) as ordered, Set of seals, 0.5 meter hose with 1/4" BSP(F) adaptor and Robust foamed ABS transit case

PGS-1000-H-XXX Hydraulic Test Kits

The Kit comprises of: PGS-1000-OEM Pump, Set of BSP adaptors (1/4" BSP(M) to 1/8", 3/8"(F) & 1/2" BSP(M)) or Set of NPT adaptors (1/4" BSP(M) to 1/8", 3/8"& 1/4" NPT(F)) as ordered, Set of seals, 0.5 meter hose with 1/4" BSP(F) adaptor and Robust foamed ABS transit case

(XXX – BSP or NPT)

Pneumatic and Hydraulic Pressure Calibration Kits / Calibrators

P100 Series Pneumatic & Hydraulic Calibration Test Kits are supplied with High accuracy Digital P100 Pressure Test Gauge, a microprocessor controlled digital pressure gauge, which offer compact and robust solution, high precision, stability and functionality. The gauge is powered by long life internal Alkaline battery with auto-off feature.

A wide range of hand held pressure Test pump kits are available to offer a complete testing solution for maintenance and routine calibration.

P100-PC Series Pneumatic Calibration Test Kit / Calibrator

P100 Pneumatic Calibrator

Combined Vacuum / Pneumatic Calibration Test Kit when included with Digital Test Gauge P100 makes it Pneumatic Calibration Kit / Pneumatic Calibrator.

The P100-PC is available in two pressure ranges.

Range (PGS-40-P-XXX):       -960mbar to 40 bar (600 lb/in²)

Range (PGS-60-P-XXX):       -960mbar to 60 bar (870 lb/in²)

P100-PC-40-0-XXX

This unit is supplied with

  • 40 bar Digital Test Gauge P100
  • PGS-40-OEM Pump, 40 bar
  • 0.5 meter hose with 1/4″ BSP(F) adaptor
  • Set of seals
  • Set of BSP adaptors (1/4″ BSP(M) to 1/8″, 3/8″(F) & 1/2″ BSP(M)) or Set of NPT adaptors (1/4″ BSP(M) to 1/8″, 3/8″& 1/4″ NPT(F)) as ordered
  • Robust foamed ABS transit case
  • Traceable Calibration Certificate for Digital Gauge (UKAS Accredited Calibration certificate, if ordered)

P100-PC-60-0-XXX

This unit is supplied with

  • 60 bar Digital Test Gauge P100
  • PGS-60-OEM Pump, 60 bar
  • 0.5 meter hose with 1/4″ BSP(F) adaptor
  • Set of seals
  • Set of BSP adaptors (1/4″ BSP(M) to 1/8″, 3/8″(F) & 1/2″ BSP(M)) or Set of NPT adaptors (1/4″ BSP(M) to 1/8″, 3/8″& 1/4″ NPT(F)) as ordered
  • Robust foamed ABS transit case
  • Traceable Calibration Certificate for Digital Gauge (UKAS Accredited Calibration certificate, if ordered)

P100-HC Series Hydraulic Calibration Test Kit / Calibrator

P100HC Hydraulic Calibrator

Hydraulic Test Kits when included with Digital Test Gauge P100 make Hydraulic Calibration Kit / Hydraulic Calibrator.

The P100-HC is available in two pressure ranges.

Range (PGS-700-H-XXX):        0 to 700 bar (10 000 lb/in²)

Range (PGS-1000-H-XXX):      0 to 1000 bar (14 700 lb/in²)

P100-HC-700-0-XXX

This unit is supplied with

  • 700 bar Digital Test Gauge P100
  • PGS-700-OEM Pump, 700 bar
  • 0.5 meter hose with 1/4″ BSP(F) adaptor
  • Set of seals
  • Set of BSP adaptors (1/4″ BSP(M) to 1/8″, 3/8″(F) & 1/2″ BSP(M)) or Set of NPT adaptors (1/4″ BSP(M) to 1/8″, 3/8″& 1/4″ NPT(F)) as ordered
  • Robust foamed ABS transit case
  • Traceable Calibration Certificate for Digital Gauge (UKAS Accredited Calibration certificate, if ordered)

P100-HC-1000-0-XXX

This unit is supplied with

  • 1000 bar Digital Test Gauge P100
  • PGS-1000-OEM Pump, 1000 bar
  • 0.5 meter hose with 1/4″ BSP(F) adaptor
  • Set of seals
  • Set of BSP adaptors (1/4″ BSP(M) to 1/8″, 3/8″(F) & 1/2″ BSP(M)) or Set of NPT adaptors (1/4″ BSP(M) to 1/8″, 3/8″& 1/4″ NPT(F)) as ordered
  • Robust foamed ABS transit case
  • Traceable Calibration Certificate for Digital Gauge (UKAS Accredited Calibration certificate, if ordered)

(XXX – BSP or NPT)