Budenberg Middle East LLC

Dead Weight Testers I Master Test Gauges I Pressure Calibrators I Temperature Calibrators I Multifunction Calibrators I Electrical Test Equipment I Pressure & Temperature Gauges I Valves I Temperature Sensors I Cables I Mixers

time electronics process and loop calibrators

What we offer?

Time Electronics hand-held and portable loop calibrators for simulation and measuring of loop current and voltage and temperature & process calibrators for simulation and measurement of process parameters in field and Calibration laboratory. 

The calibrators are supplied with Traceable Calibration and UKAS Calibration, if ordered separately.

Loop Simulators & Calibrators

Time Electronics manufactures hand-held and portable loop calibrators for simulation and measuring of loop current and voltage in field and Calibration laboratory. The calibrators are supplied with Traceable Calibration and UKAS Calibration, if ordered separately.

1048 - Voltage / Current / Loop Calibrator

Click to enlarge

The 1048 is used to simulate a transducer or measure the current flow in a transducer loop with the 24V compliance voltage powering the loop when current source mode is selected. 

In the source mode, the 1048 is used to calibrate meters, thermocouple indicators, data loggers etc. In the measure mode, the 1048 is used in measuring DC voltages and current over 3 ranges with excellent resolution and accuracy. The other features include:

  • Source / measure voltage and current
  • 3 source ranges – 0 to 22mA and 0 – 22V
  • 3 measure ranges – 0 to 70mA and 0 – 50V
  • 0.02% accuracy
  • Transmitter simulation / sink loop control
  • Output steps and ramps
  • Fine adjustment control
  • 9V PP3 battery powered, 20 hrs typical use

7005 - Voltage / Current / Loop Calibrator

Click to enlarge

The 7005 is a high accuracy calibrator incorporating source and measure capabilities primarily used for the calibration and simulation of voltage and current loops. 

An automatic power-down feature is incorporated to conserve battery life, which can easily be disabled if not required. The unit is constructed in an impact resistant ABS case and connections are made via 4 off 4mm binding terminal posts. The other features include:

  • Current – 125mA measure, 50mA Source (1μA)
  • Voltage – 25V measure, 21V source (1mV)
  • 0.01% accuracy
  • Transmitter and square root functions
  • Auto-ranging feature
  • Programmable steps and ramp
  • Internal NiMH battery, 9 hrs typical use
  • Supplied with battery charger & carry Case

7006 Loop-Mate 1:  Loop Simulator and Source

Click to enlarge

A cost-effective handheld loop simulator that provides 4 to 20mA or 0 to 10V loop signals. 

The 7006 has manual and automatic step modes with audible indication that changes pitch as the output increases / decreases. The other features include:

  • 4 to 20mA or 0 to 10V ranges
  • Set points – 0, 10, 25, 50, 75, 90, 100% of range
  • 0.01% accuracy
  • TxSim or RxTest Modes
  • Internal loop supply 25mA maximum
  • Auto-stepping up/down/up 0.5, 1, 2, 4 or 8 sec/step
  • 9V PP3 battery powered, 40 hrs typical use

7007 Loop-Mate 2: Loop Signal Indicator

Click to enlarge

A simple operation portable loop signal indicator with LCD display. Suitable for use with the 7006 Loop-Mate 1.

Loop-Mate 2 is an easy to operate dedicated loop signal indicator. Select the loop & display type, the LCD display shows the signal accordingly. Features include:

  • 4 to 20mA, 0 to 10V, 0 to 50V ranges
  • 4 digit LCD display, mA, V or % of range
  • 0.05% accuracy
  • RxSim, TxTest or 50mA/50V measure modes
  • Internal loop supply 25mA maximum
  • 9V PP3 battery powered, 40 hrs typical use
  • Supplied with carry case

Process and Temperature Calibrators

Time Electronics manufacture a wide range of hand-held and portable Temperature and Process Calibrators for simulation and measuring of process parameters in field and Calibration laboratory. The calibration certificates are optional. The calibrators are supplied with Traceable Calibration and UKAS Calibration, if ordered separately.

1049 - PT100 Simulator

Click to enlarge

The 1049 is a handheld precision simulator for PT100 used for generating PT100 resistance for accurate temperature calibration in °C. Model 1050 is °F version.

High performance metal film resistors are used throughout which ensures a good temperature coefficient and long term stability. Features include:

  • -200°C to +800°C with 23 set points
  • ± 0.03°C accuracy
  • < 30 ppm/°C temperature coefficient
  • ITS-90 IEC-60751 compliance
  • Exceeds Class A
  • Passive resistance source
  • Supplied with carry case
  • -100°F to 1000°F, accuracy  ± 0.05°F for Model 1050

7000 - RTD Temperature Calibrator

Click to enlarge

The 7000 is a portable process control instrument that combines a precision digital thermometer (using RTD probes) with an RTD / ohms calibrator.

It can also be used as an external temperature reference for dry block and other precision temperature baths. The other features include:

  • Temperature Accuracy 0.05°C, resolution 0.01°C
  • Resistance Accuracy 0.03Ω, resolution 0.01Ω
  • 2, 3, and 4 wire connections
  • Measure and simulate °C, °F, °K, & Ω
  • User programmable
  • PT100 plus 7 other RTD types
  • NiMH battery powered, 24 hrs typical use
  • Supplied with battery charger and  carry case

1090 - Process and Temperature Calibrator

Click to enlarge

The 1090 is a precision portable process calibrator that combines source and measurement functions for thermocouples, PT100s, µV, mV & mA.

As a multifunction instrument the 1090 combines accuracy and durability with simple operation, making it ideal for process plant applications. Up to 10 values can be stored in the unit’s non-volatile memory. The features includes:

  • Measure/simulate thermocouples
  • Measure/simulate PT100
  • Measure/source (µV/mV/mA)
  • Display in °C and °F
  • Automatic CJC – selectable
  • 10 point memory recall
  • Process loops 4-20mA/0-50mA

7050 - Process & Thermocouple Calibrator

Click to enlarge

The 7050 Process Calibrator measures and simulates volts, mV, mA, and ohms with the direct readout simulation of thermocouples and RTD’s in °C or °F units.

Five calibration points are instantaneously accessible through a preset percentage selector and all functions may be generated in a fully programmable ramp format. The other features include:

  • Measure (3 ranges) up to 40V, 400mA, 40kΩ
  • Output voltage (3 ranges) to 10V, 1μV resolution
  • Output current (3 ranges) to 20mA, 1μA resolution
  • Output resistance: 0 to 400Ω, 0.01Ω resolution
  • Measure and simulate: PT100 and Thermocouples
  • Ramp function
  • Battery or mains operation